Resione Tough 74 V2 Review

$\"\"$
When it comes to 3D printing action figures, having the right resin can make all the difference. Resione Tough 74 has been my go-to resin for a while. Now, with the release of Resione Tough 74 V2, I was eager to see how this new version compares to the original. In this review, I’ll break down its key features, improvements, and whether it’s worth making the switch. Plus, I’ll share my experience printing my latest action figure using this resin.

A Look Back at Resione Tough 74

Before diving into the V2, let’s take a moment to appreciate the original Resione Tough 74. This resin, when it was released, became my favourite resin for action figures. Prior to Tough 74, I was using a mix of Resione M58 + Anti- impact bringing together the best properties of the two resins.

The Tough 74 resin solved the hassle of mixing resins and I could use the resin straight out of the bottle.

Key features of the original Tough 74:

High durability, reducing breakage in small joints and parts.
Excellent flexibility when heated, making assembly easier.
No grinding or dusting, ensuring smooth articulation.
Great paint adhesion.
Available in two colors: grey and black.

Over time, I used Tough 74 for numerous action figure prints, and the results were consistently impressive. However, I did notice some slight loosening in joints with prolonged movement, particularly in my Absolute Batman figure. This was before I made improvements to joint designs, so part of this issue was on my end. Still, it was something I kept in mind when testing the V2.

$\"\"$
$\"\"$

What’s New in Resione Tough 74 V2?

Print Settings and Test Print

For my test, I printed a Nightwing action figure using the Uniformation GKTwo printer and Lychee slicer.

My settings were:

Burn-in layers: 5 layers at 44s exposure.
Layer thickness: 0.04mm at 2.8s exposure.
Printer temperature: 30°C.
Print time: 4h 40m.
Resin usage: 70ml for all parts and accessories.

Cleaning and Post-Curing

Cleaning: Two 2-minute IPA baths (90-100% alcohol) for thorough resin removal.
Curing: 15 minutes per side in the curing chamber for full hardness.

$\"\"$
$\"\"$

Articulation and Durability

I tested the joint stiffness and articulation of several resins, and here’s how Tough 74 V2 compares:

Anti-Impact: Very soft and flexible but lacks fine details.
Sunlu Nylon-Like: Some grinding issues but a decent alternative.
Anti-Impact + M58 Mix: Excellent balance between flexibility and rigidity.
M58: Strong mechanical properties, but slightly weaker in overall strength.
Tough 74 V1: Great flexibility and detail, multiple colors available.
Tough 74 V2: Great flexibility and detail, better grip than V1, single color option.

One major advantage of the Tough 74 resins is their resistance to powdering—unlike other resins that powder when there is resin to resin contact, this one holds up well with only minor surface scratches.

Action Figure Test: Nightwing in Tough 74 V2

I printed my Nightwing action figure entirely in Tough 74 V2, and the results were impressive:

Assembly: Smooth and straightforward with a hairdryer.
Joints: Move easily but hold positions well.
Durability: Despite being a slender figure, the joints felt strong and sturdy.
Hand swapping: No noticeable loosening after multiple swaps.

I’ll continue testing over time, but initial results suggest that Tough 74 V2 holds up better than V1 in articulation and long-term joint stability.
$\"\"$
$\"\"$

Final Verdict: Should You Upgrade?

Resione Tough 74 V2 is a small but meaningful improvement over V1. The changes aren’t drastic, but the slight boost in grip strength and articulation stability make it a solid choice for action figure printing. Given the minimal price increase of just $2, it’s a worthwhile upgrade.

Key takeaways:

Similar print settings to V1—no major adjustments needed.
Better grip in joints, reducing long-term looseness.
Only one color option (grey) vs. two in V1.
Resistant to powdering, making it great for articulation.
Supports 0.03mm layer height, addressing a limitation of V1.

If you’re already using Tough 74, V2 is a safe and effective upgrade. And if you’re new to resin printing for action figures, this is one of the best single-resin options available.

Looking for More? Check Out My Patreon!

If you love action figures and 3D printing, consider supporting me on Patreon, where I post monthly polls for upcoming figures, exclusive diorama files, and sculpting projects.

Thanks for reading, and happy printing!

$\"\"$